Icom’s A120 air band mobile introduces two new features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The newly added built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition. Insert the optional UT-133 Bluetooth® unit and connect a third-party wireless Bluetooth® headset.
This unit is great for any mobile application and it’s available in a base station. Both are built to mil spec for superb reliability!
The ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger. When you take the microphone OFF hook, the scanning stops at the priority channel or displayed channel. The Dualwatch function checks the priority and operating channels alternatively.
When using a third-party headset with the optional OPC-871A headset adapter, the side tone function allows you to monitor your own transmitted voice via the connected headset. Even when using a hand microphone, your voice can be monitored from the headset.
Channel spacing
Power supply requirement
13.75V/27.5V DC
Current drain (at 13.75 V DC) Transmitting Receiving
-30°C to +60°C;
Dimensions
(W×H×D, Projections not included)
161×45×193 (mm);
6.34×1.77×7.6 (in) (approximately)
Selectivity
8.33kHz
25kHz
2.778/7.37kHz (6dB/60dB)
8/25kHz (6dB/60dB)
Audio output power
Internal SP (8O load)
External SP (8O load)
Headphone (500O load)
10% distortion, 60% modulation)
1.5W typical
More than 10W
More than 100mW
Measurements made in accordance with FCC Part 87 for USA version or EN 300 676-1 for Europe version. All stated specifications are subject to change without notice or obligation.
Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows: